Skip to content

Ryobi Table Saw – Review Tools In Action, Power Tool 2023

Ryobi Table Saw

Ryobi Table Saw – Review Tools In Action, Power Tool 2023

fire brick bifold doors

If you have ever been to The Home Depot, I am sure you have visited the tool aisle and seen the green-colored tools. Ryobi tools are a huge part of the tool department at the store, and for an excellent reason. Ryobi is designed for the homeowner. While the tools are inexpensive, they pack a powerful punch. 

Ryobi offers many of the same options with professional tools, but for a fraction of the cost. We have received many emails about the Ryobi table saw, model RTS21G, so we figured we would get one and do a Ryobi Table Saw Review. So here we go.

If you sit back and look at one table saw from another, you probably will only notice a price difference as most table saws look the same. 

Well, except for colors. While there is a justification for the expensive models, why would a homeowner need to pay twice as much for one when a homeowner might only use it ten times a year? Well, that is where Ryobi comes in. 

etagere bookcase with drawers 2023

Bestseller No. 2
  • ONE+ HP Technology Delivers Corded Cutting...
  • Rip Up To 240 Linear Feet Per Charge With (2) 4Ah...
  • Controlled, Accurate Cuts
  • (1) PBLTS01 - 18V ONE+ HP BRUSHLESS 8-1/4" TABLE...
  • (2) PBP004 - 18V ONE+ 4Ah Batteries
Bestseller No. 3
RYOBI RTS12 15 Amp 10 in. Table Saw with Folding Stand (Renewed)
  • Powerful 15 Amp motor with 5000 RPM to complete an...
  • Includes -Folding Stand, Mounting Hardware, and 10...
  • Also includes Push Stick, Miter Gauge, Rip Fence,...
  • Steel roll cage design for added durability and...
Bestseller No. 4
Ryobi 7 in. Tabletop Tile Saw
  • Miter guide allows for easy miter cuts from 0° to...
  • Locking rip guide sets up along the front and rear...
  • Powerful induction motor powers through ceramic,...
  • 7 in. continuous-rim diamond cutting wheel offers...
  • Cutting table tilts for precise 22.5° and 45°...
Bestseller No. 5
RYOBI ONE+ 18V Cordless 7-1/4 in. Sliding Compound Miter Saw
  • Up to 800 cuts per charge
  • Best in class 2X10 cross cut capacity
  • Over 260 ONE+ Tools – All Work With Any RYOBI...

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

  • Protect hands and prevent kickback like never before
  • best Powerful high-friction durable grip for extreme hold
  • Precision cutting and control down to 1/4″ Ripping
  • Fully adjustable for easy handling
  • Work with small stock safely on the table saw, Router Table, Jointer, & Band saw
  • Made in the USA. A true MICROJIG Innovation.
  • Extended 3-Year. 100% Satisfaction.

DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)

Are Ryobi table saws any good?

Overall, the Ryobi RTS31 10-inch table saw is a great value. At $299, you get a product with a lot of versatility and ample power for any cutting task. Whether it was 2×4 material or sheet goods, the RTS31 held up well and didn’t bog down under load.

Ryobi is made by a company called Techtronic Industries Co. Ltd. The same company makes Milwaukee tools, which are considered professional power tools. 

While I am not sure how much information they share back and forth, I know this company knows tools. So when it comes to the Ryobi name and image, you can bet that Techtronic Industries Co. Ltd. is making the best homeowner tools for the money. Regarding the table saw, this is packed with a bunch of goodies.

The fence is the first thing I want to chat about, which I think is most important. I have seen a ton of saws out there where they design a great table saw but a junky wall. You need to have a good fence for final output and safety. What I look for in a wall is a fence that, once you lock it, stays locked and stays in place. The wall mustn’t move at all. 

DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)

About this item

  • Portability: Compact size for ease of transportation and storage
  • Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate.
  • Variety of cuts: 24.5 inches of rip capacity for ripping 4×8 plywood or OSB sheets
  • Power: 15 Amp, 5800 rpm motor
  • Onboard storage: Onboard storage provides easy access to the site pro guarding components and pushes sticks when not in use
  • Guaranteed tough: Metal roll cage ensures job site durability.

DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)

Images for Ryobi Table Saw

  • Ryobi bt3000
  • portable table
  • rolling stand
  • saw blade
  • 15 amp
  • miter gauge
  • steel stand
  • circular saw
  • miter saw
  • dado bladeblade guard
  • rip fence

What’s the best table saw for the money? Quick Overview

  • Best Portable Table Saw – DEWALT DW7485/XA.
  • Best Contractor Table Saw – DEWALT DWE7491RS.
  • Popular Hybrid Table Saw – Shop Fox W1837.
  • Best Cabinet Table Saw – SawStop PCS175-TGP236.
  • Best Budget Portable Table Saw – SKIL 3410-02.
  • Value Portable Table Saw – Bosch GTS1031.

You will usually see movement in the back of a fence after the blade. It will produce an undesirable cut, but it can also cause a kickback and get you hurt. The Ryobi fence seems to be quality. It locks it in the front and back when you close the wall, making it secure. 

I don’t see this moving around or causing any problems. What’s good with this fence is that even if it starts to move, the user can adjust its tightness. On the back of the wall, there is a screw that you can adapt to make the back locking mechanism lighter or looser. So for me, this is a massive win for the Ryobi table saw. Now we can get onto the other items.

Best Marble Coffee Table 2023

  1. Ryobi table saw parts
  2. Ryobi table saw portable
  3. review Ryobi table saw a
  4. Ryobi table saw extension
  5. wheels Ryobi table saw stand
  6. Ryobi 15 Amp 10 in. table saw with folding stand

The saw is powered by a 15 amp motor that produces a no-load speed of 5,000 RPMs. As far as the rip capacity, you get 27″ to the right, thanks to the extension table. To the left, you get 12″. If you need to install a dado blade, it will accept up to 1/2″, perfect for any woodworking project. As with other table saws, you get all the accessories such as a miter gauge, blade gauge, anti-kickback tool, plus a push stick stored conveniently on the side of the table.

DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)

Ryobi Table Saw – Review Tools In Action, Power Tool 2023

 However, this comes with a stand that many saws don’t. Usually, you have to buy a table saw stand separately. Now don’t expect a top-of-the-line perspective because it’s not. However, the air does a great job, and it’s straightforward to separate the saw from the frame. The rack will even store on the saw when not in use. As a note, make sure you read the directions before you install the stand.

 I thought I knew everything and just started fastening everything together. Well, I couldn’t get the saw to attach to the stand. Once I read the directions and did it correctly, I didn’t have any issues. Here is some more good news, the saw comes with a 3-year warranty.

Overall I like this table saw. I felt like it would cut through anything I threw at it. Our saw was straight from the factory, so I didn’t have to mess with anything. As I said, while I like the stand, it could be a tad better. You have to remember that this is a homeowner table saw. 

So if you go from a pro saw to this, you might not dig this saw. However, if you are a weekend warrior during some cool projects, this is a great saw that won’t break the bank. The fence moves freely and locks down tight.

craft table with storage on wheels 2023

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

About this item

  • Stainless-steel miter detent plate or 12-inch miter saw blade comes with 14 positive stops
  • The miter saw features the precise miter system and machined base fence support
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically
  • Bevels 0 – 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch
  • 2-inch x 8-inch dimensional lumber crosscut capacity at 90 degrees and 2-inch x 6-inch dimensional lumber at 45 degree

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

Images for Ryobi Table Saw

  • rolling stand
  • folding stand
  • portable table
  • circular saw
  • steel stand
  • Ryobi portable
  • expanded capacity
  • saw blade inch Ryobi
  • saw stand capacity table compact table

Ryobi Table Saw Review Specifications

  • Motor: 120V, 60 Hz, 15 Amps
  • Blade Diameter: 10″
  • Arbor Size: 5/8″
  • Depth of Cut at 90°: 3-1/4″ Depth of Cut at 45°: 2-1/2″
  • Rip Capacity: 27″ Right of Blade, 12″ Left of Blade
  • RPM: 5,000 (no-load speed)

Bottom line, if you’re a homeowner, this is a great buy at $299.  Not only do you get the saw, but you get a pretty decent stand to go along with it.  With a 15 amp motor, you are pretty much getting the same powerful motor that the big boys offer, but again, at a fraction of the cost.  

Yes, they are different motors, but the saw is for different uses.  A contractor will be using their saw almost daily, so it does need to be a little beefier.  The homeowner doesn’t use it daily, so why add extra cost onto a saw that doesn’t require it?  If you are looking at investing into a new table saw, the Ryobi is worth a look.  Hope you enjoyed our Ryobi Table Saw Review.

What is the best table saw for a beginner? The Best Beginner Table Saws

  • Our #1 Choice – Sawstop. For the beginner woodworker, there is just a no better option than a Sawstop. …
  • The Best Jobsite Table Saw – Dewalt 10″ Table Saw. …
  • Best Hybrid Table Saw – Grizzly G0771z. …
  • The Best Cabinet Table Saw – Sawstop Cabinet Saw.

Can a 10 inch table saw cut a 4×4?

A standard 10-inch table saw can’t cut all the way through a 4×4 in one pass. … A high-end table saw with a 12-inch blade can cut a 4×4 in one pass with a maximum cut of about 4 inches.

Metabo HPT 10-Inch Compound Miter Saw, Single Bevel, 15-Amp Motor, 0-52° Miter Angle Range, 0-45° Bevel Range, Large Table, 10″ 24T TCT Miter Saw Blade (C10FCGS)

About this item

  • 10″ Compound Miter Saw
  • MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
  • LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
  • MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
  • BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
  • LARGE TABLE: Offers better material support with vice clamping system to secure work piece
  • THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

Overall, the Ryobi RTS31 10-inch table saw is a great value. At $299 you get a product that has a lot of versatility and ample power for any sort of cutting task. Whether it was 2×4 material or sheet goods, the RTS31 held up well and didn’t bog down under load.

Ryobi Table Saw – Review Tools In Action, Power Tool 2023

In that aspect, this is a saw that will stand up to whatever you throw at it. For those wanting to treat their tools a bit less gently, we’d recommend going with a different model with a bit more metal and a few less features that might not bear up under the heavier loads and abuse often experienced on the job site.

Even with that caveat, this is a great portable saw for the money. If you want a bit more durability, expect to pay about $100 more and lose both the easy rolling feature and the stand. That’s the trade-off, so you can factor that in when making a purchasing decision.

When Ryobi dropped off their new RTS31 10″ Table Saw we knew the company had made some pretty big changes. The most obvious was the sliding miter table and newly-designed outfeed support. This $299 Ryobi RTS31 10-inch Table Saw aims to position itself squarely at the DIY market and it certainly seems like a capable product for that.
We got to play with it quite a bit as we built a murphy bed as part of a complete built-in system within an historic home built before 1920. We had tons of rips and crosscuts to make, and the Ryobi RTS31 got quite the workout.


The big features of the Ryobi RTS31 10-inch table saw include its fairly large right-side rip capacity. We got around 31-inches off our sample, thanks to the sliding miter table and outfeed support. The fence seemed easy enough to adjust. It had that same “looseness” common to lower-priced table saws, but when you lock it down it straightens out.

Our blade was properly aligned without having to adjust it, but the table scale was off by a full 1/8″, and we weren’t able to fully adjust it given the minimal amount of play available in the adjustable guide. That meant we had to pull out the tape measure for most of our cuts.

ryobi RTS31 table saw outfeed

The outfeed support on the Ryobi RTS31 10-inch table saw was a great feature, but one that didn’t look like it would hold up to job site abuse—it simply doesn’t have teh metal required to withstand impacts or bending under a heavier load. This is largely why we feel this to be an excellent DIY saw, but not so well-suited for professional applications. Given its price point, it’s still a great value.

ryobi RTS31 table saw spring leg

An adjustable spring-loaded foot on the folding stand means that you can now balance the saw on almost any surface. One thing to keep in mind, however, is that the rather steep angle of the leg may allow the bolt on the adjustable foot to bend over time, so we recommend using it sparingly and to not leave it extended fully when its not needed.


We were able to use the Ryobi RTS31 10-inch table saw, as we indicated earlier, to rip and cross cut all of the pieces for a queen-sized Murphy bed that we built right into a bedroom of an historic home. Sheet goods received plenty of support from the outfeed, and the sliding miter table really made quick work of smaller cross cuts.

The fence held up nicely for our rips and we found it easy to make repeated cuts. The blade guard is flexible and it wasn’t too difficult to reach in and adjust it when we went back and forth between through-cutting and non-through-cutting applications.

How powerful is a 15 amp table saw?

table saw has a powerful 15- amp motor that generates 5000 RPM designed for cutting various wood working materials with precision for jobsite and workshop task.

How much does a Ryobi table saw cost?

Compare Similar Products

current product Top RatedExclusive


15 Amp 10 in. Table Saw with Folding Stand Bench Circular Saw KS 115 15 Amp 10 in. Table Saw with Folding Stand

$18900 $12597 $34900

(1005) (17) (458)

Ryobi Table Saw – Review Tools In Action, Power Tool 2022

How many amps does a Ryobi table saw use?

The Ryobi 10 in. Table Saw is lightweight, durable, and easy to use– making it a great addition to any tool collection. Powered by a 15 Amp motor, it can generate up to 5000 RPM for powerful cutting, and the 25 in.

Is the Ryobi table saw good?

A mildly powerful 5000 RPM saw with a rip capacity of 12 1/2 inches, the Ryobi RTS08 is a decent all-arounder for satisfactory professional work and excellent home use.

Metabo HPT 10-Inch Compound Miter Saw, Single Bevel, 15-Amp Motor, 0-52° Miter Angle Range, 0-45° Bevel Range, Large Table, 10″ 24T TCT

Searches related to Ryobi table saw.

  • folding stand with Ryobi 15 amp 10 in. table saw
  • Ryobi table saw portable
  • Ryobi table saw stand with wheels
  • best Ryobi 10 in. table saw with rolling stand
  • Ryobi table saw parts
  • extension Ryobi table saw
  • Ryobi 10″ table saw with steel stand, 15 a

Flex Tape Rubberized Waterproof Tape, 4″ x 5 2023

11 Best Bathroom Storage Cabinet Ideas

The 7 Best Electric Fireplaces of 2023

6 Best Cleaners for Glass Shower Doors Natural Cleaning Tips 2023

Ryobi Table Saw – Review Tools In Action, Power Tool 2023

Last update on 2024-04-19 / Affiliate links / Images from Amazon Product Advertising API