Here’s How to Sort Out the Most Common Plumbing Problems

Most Common Plumbing Problems

Here’s How to Sort Out the Most Common Plumbing Problems

Plumbing problems can go undetected for a long time and cost you hundreds of dollars later when you get the chance to actually fix them. Plumbing complications can also waste a lot of water. It’s only when the issue reaches a breaking point that you’ll start noticing plumbing complications and get hit with a massive bill.

However, you can always prepare for plumbing issues and prevent them from happening even before you start seeing signs of trouble. Most of the issues you’ll come across will require plumbing experience but you don’t always need to call a plumber.

You just need some extra time, patience, and some knowledge around the most common plumbing problems. Here’s how you can fix the most recurring plumbing problems on your own without needing a professional plumber.

Dripping Faucets

If you’re facing this problem with your plumbing at home, you know how much of a nuisance dripping faucets can be. This problem also wastes water and costs you a lot of money. An experienced plumber will be able to tell you right away whether the problem is with a worn-out O-ring or worn-out washers that you can replace easily.

The more experience you’ll gain around your home plumbing, the faster you’ll be able to identify the source of the problem. Sometimes, the faucet is not properly installed, or corrosion took place, therefore leading your faucet to drip. While most people would call a plumber, an average household can manage to identify the problem and fix it without professional help.

Pipe Leaks

Leaky pipes are one of those common plumbing problems that can go undetected for a while. You may not even find out about the leaks in your kitchen or bathroom pipes until an inspection is done on them. Most of the time, pipes break and crack during the cold seasons when the water freezes,  causing the pipes to burst. You’ll need to fix this problem as quickly as possible before it costs you money and damages your furniture and floors.

Since leaks need immediate attention, it’s important that you carry out regular thorough inspections on your pipes to be able to detect problems as soon as they take place. Other reasons that cause leaks include corrosion, bad clogging, high water pressure, and seals or cracks. 

Reduced Water Pressure 

It’s hard to use your plumbing system at home when you have low water pressure. This issue can be solved after detecting the main reason behind it. For example, your kitchen water pressure can go low due to the build-up of sediment and calcium.

Start by checking your cold and hot faucet’s water pressure, All Service Plumbers in Buena Park recommend checking for water leaks, pipe corrosion, and blocked sewer lines. One of these problems can be the reason why your faucets are having low water pressure. It’s important to identify the source of the problem first before attempting to fix the problem. For example, if you see mineral deposits on the aerator, you’ll need vinegar to clean the deposit and fix the problem.

Clogged Drainage

Problems with drainage at home can lead to serious plumbing disasters and can even put your family’s health at risk, so they need to be addressed as quickly as possible. If you notice that the problem is in only one drain of your home, that means that only this particular drain is clogged and that you can fix the problem on your own.

A drain can get clogged due to various reasons including soap build-up, hair, and other small objects that fall down the drain and cause it to be clogged. This should be easy to fix by maintaining a routine drain cleaning. However, if there is more than one clogged drain, the problem might be with the sewer lines which are a lot more complicated and require professional help. 

Running Toilets

Running toilets is another plumbing problem that wastes a lot of water and costs you money. The reason why this problem happens is that the flapper valve becomes faulty. This valve’s main job is to control the water passing from the tank to the bowl of the toilet. When it goes faulty, the water keeps going into the bowl and you end up with a huge bill at the end of the month. If you have access to a toilet repair kit, this problem should be easy to fix. 

Nobody likes to not find hot water when turning on the shower, and clogged drains can really be a headache. However, most of these problems don’t even require a plumber. If you know the source of the problem, you can save a lot of money by fixing these plumbing issues by yourself.

Leave a Reply

Your email address will not be published. Required fields are marked *